Quick Answer: What Is 8 Speed Bike?

Is 8 speed bike enough?

8 speed rear cassette is good enough- Providing you get the range correct for your legs.

But that is easier to do with 10 speed- I ride 8 speed(24) and 10speed (20) and have to admit that the 10 speed is easier to find the right cog.

Even 7 speed is more than enough..

Are 7 and 8 speed chains the same?

5, 6, 7 and 8 speed chains Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. … Of others, 9 speed chain can work. It is a bit narrower than optimal, but it can be used.

Is a 9 speed bike good?

Yes. A 9-gear bike is just as good as an 11-gear bike. Instead of focusing on the number of gears (not speeds) you should be concentrating on the quality of the bicycle as a whole. Fortunately, it is tough to buy a bad bike if you are smart and go to a bicycle shop.

Is 3 speed bike enough?

The choice of whether to get a 3-speed bike or an 8-speed bike really depends on your riding needs. With a 3-speed bike, you can worry less about maintenance while experiencing a more comfortable ride. It’s also easier to shift gears with a 3-speed bike; you’ll be able to shift gears whether you’re pedaling or stopped.

Can I use a 9 speed derailleur on a 8 speed?

There is no disadvantage to using a 9 spd derailleur with an 8 speed cassette, the pull ratio is exactly the same as for the 8 speed.

Should you change gears while pedaling?

You must be pedaling when you change gears. That’s because the chain has to be moving in order for the derailleurs to “derail” the chain from sprocket to sprocket. If you click the shifters without pedaling, the gears won’t change until you do start pedaling, and when you do, you’ll hear some very disconcerting noises.

What is a 3 32 chain?

3/32″ (0.094″, 2.30 mm) chain is used on derailer equipped bicycles that have more than 3 cogs at the rear. Even somewhat narrower chain, typically . 090″ or 2.29 mm between the inner plates, is used for derailer-equipped bicycles with 9 or more sprockets at the rear.

Can I change my 8 speed to a 10 speed?

Yes, it will fit fine. 8,9,10spd freehubs are the same. If it’s road you’re talking about then you’ll need a 1mm spacer behind the cassette if it’s Shimano, if it’s MTB then it’ll go straight on.

What is a good average speed on a road bike?

Average speed – indications Beginner, short distance (say 10-15 miles): average speed 12 mph. Most cyclists can achieve 10-12 mph average very quickly with limited training. More experienced, short-medium distance (say 20-30 miles): average 15-16 mph. Reasonable experience, medium (say 40 miles): average around 16-19 …

How fast can my bike go?

On average, your maximum speed will be at about 30 MPH. For professionals, the maximum speed raises to about 45 MPH. If you plan on going any faster, it’s best to get a bike that’s designed for insane speeds.

What does an 8 speed bike mean?

The 8-speeds use what most folks would probably refer to as the “standard” gearing set-up on a bike – different-sized external cogs are shifted through by moving the chain with a derailleur (that thingy that hangs down with the “little pulley” on it that adjusts the chain’s tension and slides it left and right to …

What does the speed mean on a bike?

Bikes generally have 1, 3, 18, 21, 24, or 27 speeds. (10- and 15-speeds are obsolete and you don’t see them on new bikes anymore.) Lower numbers are the low gears, and higher numbers are the high gears. First gear is a low gear. … Downshifting means going to a lower gear, and upshifting means going to a higher gear.

When should I shift gears on my bike?

If you’re pedaling too fast, and there isn’t enough resistance, shift into a harder gear. You’ll also go faster. 5. If you’re pedaling too slow, and it’s hard to turn over the pedals, don’t be afraid to shift into an easier gear.

How do you tell if your bike is 10 or 11 speed?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

Are 8 and 9 speed chains the same?

7, 8, and 9 speed chains have the same inner width, but 9 speed chains have thinner outer plates for a thinner overall chain. So while a 9 speed chain works fine on a 7 or 8 speed drivetrain, it will be a weaker chain that tends to “stretch” faster.

What does 9 speed bike mean?

When magazines and websites talk about a bike’s ‘speed’, it’s a reference to the number of sprockets. A bike with three chainrings and nine sprockets is 9-speed, even though it has 27 theoretical ratios. The higher the sprocket count, the more expensive, smoother shifting, and lighter weight the gears.

How do I pick the right bike?

From frame size to extra features, here’s how to find your perfect ride.Choose the right bike type based on your needs.Calculate how much you want to spend.Make sure your bicycle fits you.Know Your Gears, Suspension, and Brake Type.Adjust the fit and go for a test ride.

Is 7 speed bike enough?

A 7-speed bike is a great bike for a person who rides on tricky terrain. It’s main purpose is to let the bike adapt to rough conditions and accommodate inclines, bumps and other difficulties. On a 7-speed bike, the lower gears make it easier to pedal and the higher gears allow for better movement going downhill.